The hand wheel scale can be zeroed and is marked in degrees and 10 min divisions. It is calibrated in 5 deg increments around the rim. Bronze worm wheel and steel worm with 36: 1 ratio.

Overall Height is 1-1/2"
Center height when vertical is 1-1/2"

This new table has an extended base below the chuck so as to allow firm clamping of chuck at any position. This feature is only available from GARVIN Tools.

Excellent Quality - New to US market

Features:

• The hand wheel scale which can be zeroed, is marked in degrees and 10min divisions.
• Bronze worm wheel and steel worm with 36:1 ratio.
• Gear meshing is adjustable to take up wear.
• Base is 145mm x 126mm
• Height when horizontal is 65mm
• Two 10mm Mounting holes for easy mounting
• Table is Graduated to 0-360 Degrees with 5Degree divisions
• Table has 4 T-Slots, 8mm wide
• Tilts accurately up to 90 Degrees with 1 Degree Increment

* Tailstock also available for this rotary table.

The top plate is designed from solid mild steel plate ensuring greater rigidity and extra thickness allows frequent regrinding.

Full loading power over entire plates.

Set comes with 7 interchangeable points for a variety of applications. Packed in fine finished wooden box. Ejecting key included.

Features:

• Manufactured from High grade alloy steel
• Takes up to 1/2" Round Boring Tools either parallel or perpendicular.
• Threaded Back for Quick replacement of Shanks, interchangeable with R8, MT-2 & MT-3 with a drawbar of 3/8 BSW (shanks GSS-8053, GSS-8054, and GSS-8055).
• Micro Adjustment gives a feed of 0.0001" on diameter per division
• Hardened & Ground Blocks

Features:

• Proper brazing is done of the carbide tips to avoid chipping and breaking while the tool is in use.
• The same bars can bore flat-bottom holes.
• The massive head behind the cutting edge promotes rigidity & long tool life by reducing vibration.
• Set Supplied in fine finished wooden stand.
• Each Bar is different length to cover most applications.
• Head diameter ranges from 8mm to 14.5mm in width.

Set Supplied in fine finished wooden stand.

Features:

• Table Incorporates revolving Base and is moveable to 360 degrees.
• Revolving base can be locked in any position with a help of screw.
• 2 Screw supports allow the blocking of the revolving base plate on 360Degrees
• Rigid cast Iron Body Construction

Features:

• Rigid cast Iron Body Construction

Features :

• Manufactured from High Tensile cast Iron.
• Can be used Vertically, Horizontally & longitudinally.
• Popoular amongst Model Makers, Millers & Hobbysist. Ideal for grinding purposes where different positioning is required.
• Ideal for grinding purposes where different positioning is required

Features:

• Manufactured from Closed Grain high tensile Seasoned Cast Iron.
• Swivel Base Model has 360° graduations.
• Jaws - 2"wide x 2" max open x 1-1/4" depth.

Features:

• Robust Construction Manufactured from High Grade Seasoned casting.
• Positive locking to withstand heavy loads.
• Horizontal Swivel Movement: 360°
• Vertical Swivel Movement 90°.

Features:

• Center reamed hole of 8mm and can be machined further to suitable size.
• Ideal for smaller lathes. Only 1-1/4" high with a tool capacity of 1/2".

Economy set consists of:
Block; Allen Keys;
Standard Holder; Boring holder.

Center reamed hole 7/16". Precision ground body.

Size: 2-3/4"x2-3/4"x1-3/8"

Size: 58x58x37 mm
Center bore: 11.2 mm
Lathe Capacity to 89mm

Set Includes:

Single piece construction. Black finish. Precision ground.

Size: 35mm x 24mm x 24mm with 4mm bore diameter.